E11 Code On Electrolux Washer Troubleshooting Step Guide

E11 Code On Electrolux Washer Troubleshooting Step Guide

The E11 error code on Electrolux washers indicates a problem with the motor control board. This error occurs when communication between the motor control board and the central control unit is lost during the wash cycle. Understanding why the E11 code appears and how to reset the washer can help owners resolve this issue.

What Is The E11 Error Code On Electrolux Washers?

The E11 display code stands for a motor control circuit failure on Electrolux front load washing machines. Essentially, it means the washer cannot properly communicate with the motor control board. This prevents the washer from operating normally through wash cycles.

Common Reasons Why The E11 Code Appears

There are a few common reasons why Electrolux washers show the E11 error:

  1. Faulty Motor Control Board: The motor control board may be malfunctioning or need replacement. This circuit board controls the motor and direct drive system.
  2. Loose Wire Connections: Vibrations during washing cycles can cause wires leading to the motor control board to come loose. Reseating connections may fix it.
  3. Water Damage: Leaking water can corrode connections and damage the motor control board over time.
  4. Power Surges: Sudden power spikes can disrupt communication between components.

How To Reset E11 Code On Electrolux Washer

Here are the steps to reset the E11 error code on your Electrolux washer:

  1. Unplug the Washer from the Power Source: Ensure the washer is completely disconnected from the power outlet to prevent electrical shock.
  2. Check All Wire Harness Connections: Inspect all wire harness connections leading to the motor control board. Push in firmly to reseat any loose connections.
  3. Inspect the Motor Control Board: Look for signs of water damage or burnt components on the motor control board. If any damage is found, replace the board with a new one.
  4. Plug the Washer Power Cord Back In: Reconnect the power cord to the outlet and turn on the machine.
  5. Attempt to Run a Wash Cycle: Try running a wash cycle to see if the E11 code clears. Monitor the washer during the cycle for any abnormalities.
  6. If the Code Remains: If the E11 code persists, it indicates a more serious issue with the motor control board. Contact Electrolux support or a qualified technician for professional assistance and possible board replacement.

Frequently Asked Questions

Why Does My Electrolux Washer Say E11?

The E11 code indicates a failure in communication between the washer's control unit and the motor control board. This is typically caused by a faulty motor control board, loose wire connections, or electrical damage from power surges.

How Do I Reset My Electrolux Washer?

To reset an Electrolux washer after an E11 code, unplug the machine, check wire connections, and plug it back in. Try running a normal cycle to see if the error clears. If not, the motor control board likely needs replacement by a technician.

What Is E11 Error On Front Load Washing Machine?

The E11 error is an indication of a motor control circuit failure in many front load washing machine brands, including Electrolux. It means the washer cannot properly communicate with the motor control board, preventing normal operation.

Advertisement


Related Post

Nespresso Blinking Red 100% Fix Troubleshooting Tips


Mitutoyo Caliper Blinking 100% Fix Troubleshooting Tips


Cox Panoramic Wifi Blinking Green Fix & Troubleshooting Tips


whirlpool duet washer error codes Troubleshooting Guide


Maytag Centennial Washer Not Spinning Troubleshooting Guide


Maytag Dryer Not Heating 100% Fix Troubleshooting Tips


Philips Tv Remote Not Working 100% Fix Troubleshooting Tips


Oculus Blinking Red 100% Fix Troubleshooting Tips


Thermador Dishwasher Error Codes Troubleshooting Tips


Hisense Roku Tv Not Turning On 100% Fix Troubleshooting Tips


Privacy Policy | Terms and Conditions | Contact Us

© 2024 QueStions All Rights Reserved.